BIS CERTIFICATION FOR ETHYL ACRYLATE
IS 14708:1999

In this competitive scenario, it isn't easy to survive in the market without a standard quality and certified product. BIS license may also be required to sell products in the Indian market.

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian standard.

Let's take a closer look at IS 14708:1999 for Ethyl Acrylate.

IS 14708:1999 covers Ethyl Acrylate. The Bureau of Indian Standards adopted this Indian Standard after the Petroleum, Coal, and Related Products Division Council approved the draft finalized by the Organic Chemicals Sectional Committee.

This standard specifies the requirements and the sampling and testing methods for ethyl acrylate. The ethyl acrylate must meet the requirements specified in the standard. Ethyl acrylate is created by esterifying acrylic acid or acrylonitrile. It is widely used in the production of leather auxiliaries, paper coating, and other products. It is also used as a textile sizing agent and a water-based kerosene substitute thickener. Ethyl acrylate is a combustible liquid, and it is vapours that can form from explosive mixtures with air and are extremely irritating.

TESTS

Test shall be carried out in accordance with the method prescribed in the standard.

  • Assay test
  • Acidity test
  • Inhibitors
  • Water %

Packing and Marking:

The following information must be legibly marked on the material:

  1. The name of the material
  2. The indication of the source of manufacture
  3. Batch number, in code
  4. Net mass of the material

Packing shall be done in accordance with the terms agreed upon between the purchaser and the supplier. The Standard Mark may also be applied to the containers. Conforming to the requirements of this standard, the product(s) may be certified under the provisions of the Bureau of Indian Standards Act, 2016 and the Rules and Regulations framed thereunder. The Manufacturer must obtain a BIS license from the Bureau of Indian Standards to use a standard mark. The BIS grants a license based on a successful assessment of manufacturing infrastructure, quality control, testing capabilities, and production process.

isi mark

NOTE:

For Detailed Information about the Procedure for BIS ISI Certification, Visit :

  1. Procedure for Domestic Manufacturer
  2. Procedure for Foreign Manufacturer

Conclusion:

If a product falls under the scope of the BIS Conformity Assessment Scheme, All the manufacturers, importers, and foreign entities must obtain BIS ISI Certification. The Bureau may cancel the License if the product fails to meet certification requirements.

Aleph INDIA has been serving the industry as a single-window operator for all product regulatory compliance. We can assist importers or manufacturers in meeting all criteria for importing or selling a product in the Indian market.