ALEPH INDIA - STANDARDIZATION SCIENTIFIC DIVISION

ALEPH INDIA - STANDARDIZATION (SCIENTIFIC) DIVISION

INTRODUCTION

British rule in India was the most traumatic period for the Indian economy, almost bringing it to its knees. Indian Economy faced tremendous problems in developing the proper infrastructure. By taking this into consideration existing Government decided to form a committee of few members who all decided to work on the quality of goods and recognized that there should be a body which can monitor the quality of products, can protect end consumer from getting cheap products. This led to the establishment of the organization “Indian Standard Institute” who focused on standardization development.

Standardization is a METHODS of establishing and implementing rules/standards in a METHODSical manner for an article/specific activity for the benefits and with cooperation of all parties involved for the present and future sustained development of the economy and industry while taking functional conditions and safety requirements into consideration.

Aleph INDIA - Standardization (Scientific) Division is entrusted with Formulation of National Standards and development of the Standards.

Our Standardization division is dedicated to :-

  • To perform its jobs to the best of it’s ability to help the corporates to formulate the standards and develop the standards in line with the International Standards.
  • To achieve social and economic development
  • To enhance International competitiveness of products and services
  • To safeguard the interest of consumers.

ACTIVITIES

Main activity of the Standardization (Scientific) Division is the support and guide the industry to formulate the Standards.

The tasks relate with this division is as follows :-

  • Assist the industry in the formulation of New Standards
  • Study of International quality management practice and standards
  • Work in close corporation with the Govt agencies to update and revise the existing Standards

Major sectors covered under the Standards formulation Division

  • Chemicals
  • Civil Engineering
  • Electronics and Information Technology
  • Electrotechnical
  • Food and Agriculture
  • Mechanical Engineering
  • Management and Systems
  • Medical Equipment and Hospital Planning
  • Metallurgical Engineering
  • Petroleum Coal and Related Products
  • Production & General Engineering
  • Services Sector Department
  • Transport Engineering
  • Textile
  • Water Resources
process of standards formulation in india

The Process of Standards Formulation in India

  1. In India, standardization begins with submitting a proposal to BIS. Any organization like Ministry of the Central Government, State Governments, Union Territory Administrations, consumer organizations, industrial units, industry-associations, professional bodies, and members of the Bureau and members of its technical committees can request BIS for establishing, revising amending or cancelling an existing standard by giving written request.

  2. Division Council investigates the proposal.

  3. After investigating the proposal, if Division Council feels the need that the proposed proposal is beneficial for consumer, then Division Council shall assign the drafted proposal task to a technical committee or appoint new technical committee.

  4. Technical committee while investigating keeps in view national priorities, national development, technical need, consumer health and safety etc.

  5. Technical committee finalized the drafted standard giving due consideration to the comments that may be received. And for final approval submit the proposal to the Chairman of division Council.
standards formulation process of  in india

How ALEPH INDIA work on Standardization?

  1. Project Initiation – Project opening can begin with the request received from manufacture who wants to cover his product under the Indian standards, in case Indian Standards for that product category is unavailable till date. The first step is to obtain the product technical specifications along with a physical sample (in specific cases) so that we can begin preparing parameters which are required to be included in standards for that specific product category.

  2. Mobilize Action – After getting the product technical details or physical sample whichever is possible, our management and Engineers team organize the meeting to perform a thorough examination of the product's scope, features, specifications, and other relevant information. Proper planning and investigation is done.

  3. Drafting Standards – After studying and investigating all the features, the standard of a particular product/specific subject is drafted.

  4. Scrutiny – The drafted standard proposal is forwarded to the BIS. They will scrutiny the proposal for which a separate team of experts and engineers will be formulated to do further examination for the request received.

  5. Final Approval – If BIS finds the proposal satisfactory, then BIS grants the approval for the proposal and standard formulation will be initiated.

  6. Publish – At last but not the least, BIS publishes the standard and further actions for its successful implementation is taken by the respective department officers.

SUMMARY OF PROPOSALS & STANDARDS

IS NUMBER /
PRODUCT NAME
TYPE OF PROPOSAL SUBMISSION DATE
IS 4105:2020
STYRENE MONOMER
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2020
IS 15030:2013
TEREPHTHALIC ACID
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2020
IS 170:2020
ACETONE
UNDER PREPERATION

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 538:2020
PHENOL
UNDER PREPERATION

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 538:2020
PHENOL
UNDER PREPERATION

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 15030:2013
TEREPHTHALIC ACID
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 4105:2020
STYRENE MONOMER
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 5295:2021
ETHYLENE GLYCOL
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 170:2020
ACETONE
UNDER PREPERATION

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 7129:2021
POTASSIUM CARBONATE
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 4105:2020
STYRENE MONOMER
UNDER PREPERATION

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 6831:1992
CAUSTIC POTASH
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 4105:2020
STYRENE MONOMER
PROPOSAL SUBMITED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
IS 17264
TEXTILE - POLYESTER INDUSTRIAL YARN
UNDER PREPERATION

[FOR INCLUDE SOME MORE POLYESTER YARN CRITERIA AND REQUIREMENT WITH WIDE RANGE]

2021
IS 717
CARBON DISULPHIDE COMPULSORY CERTIFICATION
PROPOSAL SUBMITTED TO BIS

[BRING STANDARD UNDER COMPULSORY CERTIFICATION]

2021
IS 717
CARBON DISULPHIDE - ECO MARK INCLUSION
PROPOSAL SUBMITTED TO BIS

[INCORPORATE ECO - MARK REQUIREMENT]

2021
IS 4105:2020
STYRENE MONOMER
UNDER PREPERATION

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021
REDISPERSIBLE POLYMER POWDER PROPOSAL SUBMITTED TO BIS

[FOR NEW STANDARD FORMULATION]

2021
IS 1786 : 2008
HIGH STRENGTH DEFORMED BARS AND WIRES. FOR CONCRETE REINFORCEMENT
PROPOSAL SUBMITTED TO BIS

[FOR GRADE INCLUSIONS]

2021
IS 4105:2020
STYRENE MONOMER
PROPOSAL SUBMITTED TO BIS

[FOR INCLUSION OF MODERN TESTING METHODS AND TECHNIQUES]

2021

What Aleph INDIA has to offer?

Stay on top of regulatory changes within your industry..!

With the single window compliance system, Aleph INDIA Group is assisting all the prominent & giant stack holders for standard formulations & publication through various channels all over the globe.

For more deatils about Product Standardization & Proposal to various authorities & ministries; write us to info@alephindia.in or call us at 0-804-803-68-69 / 8826230531.