BIS CERTIFICATION FOR N-BUTYL ACRYLATE
IS 14709:1999

In this competitive scenario, it isn't easy to survive in the market without a standard quality and certified product. BIS license may also be required to sell products in the Indian market.

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian standard.

Let's take a closer look at IS 14709:1999 for n-Butyl Acrylate.

IS 14709:1999 covers n-Butyl Acrylate. This standard specifies the requirements and the sampling and testing methods for n-butyl acrylate.

The n butyl acrylate must meet the requirements specified in the standard when tested according to the method prescribed. The esterification of acrylic acid or acrylonitrile produces n-butyl acrylate.

n-Butyl acrylate is used in a variety of industries. It is used in BOPP tape adhesives and pressure-sensitive adhesives. It is also used in the production of point emulsions, textile binders, and auxiliaries. It's used in leather binders, construction chemicals, and paper coatings.

TESTS

The following test shall be carried out in accordance with the method prescribed.

  • Assay
  • Acidity
  • Colour
  • Water % by mass
  • Inhibitors

Packing and Marking:

Packing and Marking shall be done in accordance with IS 14709:1999. The material must be packed in appropriate containers as agreed upon by the purchaser and the supplier. Each container must be labelled with the information as specified in the standard.

The Standard Mark (ISI Mark) shall be marked on the product's container provided that the material so marked meets all specification requirements. The Manufacturer must obtain a BIS license from the Bureau of Indian Standards to use a standard mark (ISI Mark). The BIS grants a license based on a successful assessment of manufacturing infrastructure, quality control, testing capabilities, and production process.

isi mark

NOTE:

For Detailed Information about the Procedure for BIS ISI Certification, Visit :

  1. Procedure for Domestic Manufacturer
  2. Procedure for Foreign Manufacturer

Conclusion:

If a product falls under the scope of the BIS Conformity Assessment Scheme, All the manufacturers, importers, and foreign entities must obtain BIS ISI Certification. The Bureau may cancel the License if the product fails to meet certification requirements.

Aleph INDIA has been serving the industry as a single-window operator for all product regulatory compliance. We can assist importers or manufacturers in meeting all criteria for importing or selling a product in the Indian market.