BIS CERTIFICATION FOR STAINLESS STEEL WIRE RODS IS 6527:1995

In this competitive scenario, it isn't easy to survive in the market without a standard quality and certified product. BIS license may also be required to sell products in the Indian market.

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian standard.

Let's take a closer look at IS 6527:1995 for stainless steel wire rods.

This standard specifies the specifications for stainless steel wire rods. This standard does not apply to wire rods used to make welding electrodes.

IS 8910:1978 specifies the general requirements for material supply. Unless otherwise agreed in the order, the process used to manufacture the steel and the product is left to the manufacturer's discretion. Each ingot must undergo sufficient reduction and discard to ensure that it is free of pipe, harmful segregation, and order defects. The surface of the wire rod must be smooth and free of harmful surface defects. End rings should be trimmed sufficiently to remove fins.

Tests:

The following test shall be carried out in accordance with the method specified.

  • Chemical composition
  • Tensile test
  • Hardness
  • Dimensional tolerances
  • Corrosion Resistance

Marking:

Each coil of wire rod must be marked with the manufacturer's name, trademark, cast number, and steel designation. The Standard Mark (ISI Mark) may also be applied to the material. The Manufacturer must obtain a BIS license from the Bureau of Indian Standards to use a standard mark (ISI Mark). The Bureau grants a license based on a successful assessment of manufacturing infrastructure, production process, and quality control and testing capabilities during a visit to its manufacturing premises.

isi mark

NOTE:

For Detailed Information about the Procedure for BIS ISI Certification, Visit :

  1. Procedure for Domestic Manufacturer
  2. Procedure for Foreign Manufacturer

Conclusion:

If a product falls under the scope of the BIS Conformity Assessment Scheme, All the manufacturers, importers, and foreign entities must obtain BIS ISI Certification. The Bureau may cancel the License if the product fails to meet certification requirements.

Aleph INDIA has been serving the industry as a single-window operator for all product regulatory compliance. We can assist importers or manufacturers in meeting all criteria for importing or selling a product in the Indian market.