Note
For detailed information about the Procedure for
BIS ISI Certification, visit:
Our Products
BIS certification is mandatory for Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage as per IS 16098 (Part 2):2013. This standard ensures that pipes and fittings with non-smooth external surfaces (Type B) are manufactured to deliver strength, durability, and long-term reliability in underground and non-pressure drainage applications. Certification under IS 16098 (Part 2):2013 guarantees that these piping systems conform to stringent dimensional, mechanical, and performance requirements, ensuring safe, efficient, and sustainable drainage and sewerage infrastructure.
IS 16098 (Part 2):2013 – Structured Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Type B
This Indian Standard specifies requirements for structured-wall plastics pipes and fittings with non-smooth external surfaces, intended for use in non-pressure underground drainage and sewerage systems. It includes specifications for raw material properties, dimensions, ring stiffness, impact resistance, joint performance, and long-term behavior under soil and load conditions. The standard prescribes tests for hydrostatic resistance, structural integrity, and resistance to environmental stress, ensuring reliability over the service life of the system. Pipes and fittings conforming to IS 16098 (Part 2):2013 are widely used in municipal sewerage, stormwater drainage, and infrastructure projects.
Key Highlight
| Product Name | Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage - Specification, Part 2: Pipes and Fittings with Non-Smooth External Surface, Type B |
| Applicable Indian Standard | IS 16098 (Part 2) : 2013 |
| Applicable Certification Scheme | Product Certification Scheme (ISI Mark Scheme) Scheme 1 - Schedule 2 |
| Compliance Requirement | Mandatory |
| Quality Control Order | |
| Scope as per Standard | This standard (Part 2) specifies requirements for pipes and fittings with non-smooth external and smooth internal surface based on PE structured wall piping system for non-pressure underground drainage and sewerage. |
Benefits of BIS Certification for Structured-Wall Plastics Piping Systems
BIS certification under IS 16098 (Part 2):2013 offers significant advantages. For manufacturers, it establishes compliance with national quality standards, enhances credibility, and facilitates access to domestic and international markets. For users and project developers, certified pipes and fittings ensure consistent performance, structural safety, leak-proof joints, and long service life, thereby reducing risks of system failure and costly repairs. Certification also promotes sustainable infrastructure development through reliable and durable piping systems.
Process
Process for BIS ISI Mark Certification
A streamlined process designed to ensure compliance, quality, and efficiency at every step.
01
Documentation
Preparation and submission of required documents.
02
Application Submission
Filing the application with BIS along with applicable fees.
03
BIS Audit
Inspection and evaluation of manufacturing facility.
04
Sample Testing
Testing of product samples in BIS recognized laboratory.
05
Grant of License
Successful evaluation and grant of BIS ISI Mark license.
Learn the complete process
Watch our detailed video to understand each step involved in obtaining BIS ISI Mark Certification.
Timeline for BIS Certification
The estimated time frame for obtaining BIS certification under IS 16098 Part 2 is:
For Indian Manufacturers
(Standard Timeframe)30 Days
For Foreign Manufacturers
(Standard Timeframe)180 Days
Conclusion
BIS certification under IS 16098 (Part 2):2013 is crucial to ensuring the quality, safety, and long-term reliability of structured-wall plastic pipes and fittings with non-smooth external surfaces for non-pressure drainage and sewerage applications. Compliance not only safeguards infrastructure projects but also strengthens market acceptance and consumer trust. Certified products guarantee durability, leak-proof performance, and adherence to national benchmarks, supporting safer and more sustainable urban development.
Partner with Aleph INDIA for expert guidance and complete support in obtaining BIS certification for Structured-Wall Plastics Piping Systems under IS 16098 (Part 2):2013, ensuring your products meet regulatory compliance and achieve wider market reach.
Partner with Aleph INDIA to simplify your BIS certification journey and ensure full compliance with IS 16098 Part 2 for robust and high-performance packaging solutions.
FAQ
Frequently Asked Questions
01
Why is BIS certification required for structured-wall plastics piping systems under IS 16098 (Part 2):2013?
BIS certification ensures that pipes and fittings with non-smooth external surfaces (Type B) meet quality, safety, and performance standards, reducing risks of leakage, structural failure, and environmental hazards in drainage and sewerage systems.
02
What applications are covered under IS 16098 (Part 2):2013?
This standard applies to structured-wall plastic pipes and fittings used in underground, non-pressure drainage and sewerage systems, including municipal sewerage, stormwater drainage, and infrastructure projects.
03
What tests are carried out for BIS certification under IS 16098 (Part 2):2013?
Products are tested for dimensions, ring stiffness, impact resistance, joint tightness, structural integrity under soil load, and long-term resistance to environmental stress.
04
How long does it take to obtain BIS certification for structured-wall plastic pipes and fittings?
The standard timeline is about 30 days for Indian manufacturers and around 180 days for foreign manufacturers, subject to successful testing and documentation.
RECENT INTERNATIONAL AUDITS
View All Audits
Building Trust. Ensuring Compliance.
Vietnam ALEPH INDIA is proud to announce the 𝐬𝐮𝐜𝐜𝐞𝐬𝐬𝐟𝐮𝐥 𝐜𝐨𝐦𝐩𝐥𝐞𝐭𝐢𝐨𝐧 𝐨𝐟 𝐁𝐈𝐒 𝐚𝐮𝐝𝐢𝐭 𝐟𝐨𝐫 𝐕𝐢𝐧𝐚𝐎𝐧𝐞 𝐒𝐭𝐞𝐞𝐥 , one of Vietnam’s leading steel manufacturers, for compliance with...
South Korea The Bureau of Indian Standards, just wrapped up an extensive BIS Audit for M/S UNID Co., Ltd. in South Korea. The focus of this audit was primarily on "Potas...
Malaysia We are thrilled to share that Aleph INDIA participated in another audit conducted by Indian regulatory compliance authority Bureau of Indian Standards (BIS) ...
Testimonials
Hear from industry leaders who have experienced the
impact of partnering with
Aleph.
Aleph INDIA
Mr. Abhijeet Chitlange
Sr. Sales Manager
IVicon Security Tech Private Ltd
Aleph INDIA
Mrs. Chaithra YS
Project Manager | Remidio
Innovation Solutions Pvt Ltd
Aleph INDIA
Mr. Anand Ramaswami
CEO | Makercubs
Technologies Pvt Ltd
Aleph INDIA
Mr. CHANDRA KUMAR N R
Technical Vice President |
AIR LIQUIDE MEDICAL SYSTEMS PRIVATE LIMITED
