BIS CERTIFICATION FOR FERROSILICON
IS 1110:1990

In this competitive scenario, it isn't easy to survive in the market without a standard quality and certified product. BIS license may also be required to sell products in the Indian market.

To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian standard.

Let's take a closer look at IS 1110:1990 for Ferrosilicon.

This standard specifies the requirements for ferrosilicon, which is used in the ferrous industry. This standard covers 12 grades of ferrosilicon.

IS 1387:1967 specifies the general requirements for supplying materials to this specification. Ferrosilicon must be delivered in consignment using one of the methods specified in clause 3.3 of the standard. Each batch of materials must meet the chemical composition requirements specified in the standard. The material must be relatively free of extraneous contaminations such as slag and non-metallic inclusions etc.

TESTS

The following tests shall be carried out for ferrosilicon.

  • Constitution of Consignment
  • Chemical composition
  • Size
  • Extraneous contamination

Packing and Marking:

Packing and marking shall be done as per IS 1110:1990. The material must be packed in appropriate containers. The material must be marked with the following information: source of manufacture, grade designation, cast or lot number and size, quantity, date of manufacture, and shelf life. The material may also be marked with a standard mark (ISI mark).

Manufacturers must obtain a BIS license from the Bureau of Indian Standards to use a standard mark (ISI Mark). The Bureau grants a license based on a successful assessment of manufacturing infrastructure, production process, and quality control and testing capabilities during a visit to its manufacturing premises.

isi mark

NOTE:

For Detailed Information about the Procedure for BIS ISI Certification, Visit :

  1. Procedure for Domestic Manufacturer
  2. Procedure for Foreign Manufacturer

Conclusion:

If a product falls under the scope of the BIS Conformity Assessment Scheme, All the manufacturers, importers, and foreign entities must obtain BIS ISI Certification. The Bureau may cancel the License if the product fails to meet certification requirements.

Aleph INDIA has been serving the industry as a single-window operator for all product regulatory compliance. We can assist importers or manufacturers in meeting all criteria for importing or selling a product in the Indian market.