BIS CERTIFICATION FOR HOT ROLLED STEEL STRIP
IS 1029:1970

This standard specifies the requirements for hot-rolled steel strips of three grades, soft, medium, and hard, with a nominal thickness of less than 3 mm and a width of less than 75mm, commonly referred to as baling hoop.

The strips must be made of steel produced by the open hearth, electric, duplex, basic oxygen, or a combination of these processes. The chemical composition requirements specified in the standard must be met by the materials. The material must be free of harmful defects. Unless otherwise specified, hot rolled steel strips must be supplied in the dimensions agreed upon between the purchaser and the manufacturer.

TESTS

The following test shall be carried out for a hot rolled steel strip.

• Chemical composition
• Tensile test
• Bend test

Packing and Marking:

Packing and Marking shall be done as per IS 1029:1970. Each length of the strip must be marked with the size and grade of the material. A standard mark (ISI Mark) may also be applied to the product.

Manufacturers must obtain a BIS license from the Bureau of Indian Standards to use a standard mark (ISI Mark). The Bureau grants a license based on a successful assessment of manufacturing infrastructure, production process, and quality control and testing capabilities during a visit to its manufacturing premises.

NOTE:

For Detailed Information about the Procedure for BIS ISI Certification

Conclusion:

If a product falls under the scope of the BIS Conformity Assessment Scheme, All the manufacturers, importers, and foreign entities must obtain BIS ISI Certification. The Bureau may cancel the License if the product fails to meet certification requirements.

Aleph INDIA has been serving the industry as a single-window operator for all product regulatory compliance. We can assist importers or manufacturers in meeting all criteria for importing or selling a product in the Indian market.