BIS CERTIFICATION FOR POLYESTER SPUN GREY & WHITE YARN
IS 17265:2022

100 percent polyester spun grey and white yarn are covered under IS 17265:2022. The Bureau of Indian Standards adopted this Indian Standard after the Textile Division Council approved the draft finalized by the Man-Made Fibres, Cotton, and Their Products Sectional Committee. Polyester spun yarns are produced by ring spinning, open-end spinning, or airjet/vortex spinning 100% polyester staple (cut) fibres.

This standard defines the requirements for all types of 100% polyester spun single, double, and multifold yarns made from virgin polyester fibres.

Classification of spun yarn

1. Based on Cross Section
• Circular
• Triangular
• Trilobal
• Angular Lobal Serrated
• Profiled Oval
• Ribbon
2. Based On Cross-Sectional Area
• Solid
• Hollow

The 100 percent polyester spun single and double (two fold) yarns must be made from pure virgin polyester fibre cut staples and meet the standard's constructional and performance requirements. To ensure fibre virginity, the isophthalic acid content of polyester fibre must be zero when tested using the method specified in Annex C of IS 16481.

tests

The test shall be carried out in accordance with the standard.

1. Moisture regain of polyester spun yarns
2. Phosphorus content
3. Antimony content in polyester
4. Titanium dioxide (tio2 ) in polymer
5. Hairiness index

Packing and Marking:

Packing and marking shall be done in accordance with IS 17265: 2022. Each carton of polyester spun yarn shall be marked with information as per standard. The polyester spun yarn must be wound over paper cones, bobbins, or cheeses with standard packing, as mutually agreed upon by the buyer and seller.

Conforming to the requirements of this standard, the product may be certified under the provisions of the Bureau of Indian Standards Act, 2016 and the Rules and Regulations framed thereunder, and the product(s) may be marked with the Standard Mark (ISI Mark). The Manufacturer must obtain a BIS license from the Bureau of Indian Standards to use a standard mark (ISI Mark). The BIS grants a license based on a successful assessment of manufacturing infrastructure, quality control, testing capabilities, and production process.

Latest QCO for 100 % Polyester Spun Grey & White Yarn IS 17265:2022

BIS QCO FOR 100 PERCENT POLYESTER SPUN GREY AND WHITE YARN

NOTE:

For Detailed Information about the Procedure for BIS ISI Certification

Conclusion:

If a product falls under the scope of the BIS Conformity Assessment Scheme, All the manufacturers, importers, and foreign entities must obtain BIS ISI Certification. The Bureau may cancel the License if the product fails to meet certification requirements.

Aleph INDIA has been serving the industry as a single-window operator for all product regulatory compliance. We can assist importers or manufacturers in meeting all criteria for importing or selling a product in the Indian market.