BIS CERTIFICATION FOR UPVC DRAINAGE PIPES
IS 9271:2004

If you are a manufacturer, a question should always be on your mind while producing goods. What requirements, procedures and testing methodology, and quality control orders need to be followed to produce standard quality products? What is the procedure for BIS certification?

Make sure that your product must follow specified Indian standard for that product. Let's take a closer look at IS 9271:2004.

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage are covered under IS 9271:2004. The BIS adopted this Indian standard after the draft finalized by the plastic piping system sectional committee was approved by the civil engineering division council.

This standard specifies the requirements and testing methods for unplasticized PVC corrugated perforated/non-perforated pipes intended for use in under drainage of surface and subsurface land/farms, canals, highways, roads, foundations, construction sites, interceptor drainage in field/farms, intercepting canal seepage, and under drainage of lined canals.

The pipes shall be made of material primarily composed of polyvinyl chloride conforming to IS 10151, to which only those additives necessary to facilitate the manufacture of sound pipes with surface finish, mechanical strength, and suitability for use may be added. The composition shall be based on PVC resin having a K-value of or greater when tested in accordance with IS 4669.

The Pipe shall be subjected to the following test:

  1. Stiffness Test
  2. Impact Test
  3. Elongation Test
  4. Bending Test

MARKING

Each Pipe shall be marked with the following:

  1. Identification and source of manufacture;
  2. Nominal outside diameter of the Pipe, in mm;
  3. Perforated / Non-perforated;
  4. Length, in m; and
  5. Batch number or lot number

Each Pipe may also be marked with the Standard Mark. The manufacturer must obtain a BIS license from the Bureau of Indian Standards to use a standard mark. The Bureau grants a license based on a successful assessment of a manufacturer's manufacturing infrastructure, production process, and quality control and testing capabilities during a visit to its manufacturing premises.

isi mark

NOTE:

For Detailed Information about the Procedure for BIS ISI Certification, Visit :

  1. Procedure for Domestic Manufacturer
  2. Procedure for Foreign Manufacturer

Conclusion:

If a product falls under the scope of the BIS Conformity Assessment Scheme, All the manufacturers, importers, and foreign entities must obtain BIS ISI Certification. The Bureau may cancel the License if the product fails to meet certification requirements.

Aleph INDIA has been serving the industry as a single-window operator for all product regulatory compliance. We can assist importers or manufacturers in meeting all criteria for importing or selling a product in the Indian market.